Why should you use Monitor® Bulldog and Snappy Pitless Adapters?
- Bulldog and Snappy support 1000 lbs.
- Bulldog and Snappy gaskets and O-rings are significantly larger and seal better
- Bulldog and Snappy are system pressure tested to 250 psi
- Nearly 30% MORE BRASS used in overall construction of Bulldog
- Bulldog hinge pin secured with stainless cotter pin, rather than press fit
- AWC tappings available on Snappy pitless adapter
- Bulldog and Snappy conform to PAS-97(04) code requirements
- Bulldog Pitless contains less than 0.25% lead as required by NSF/ANSI 372
- Finger protection sleeve used on both Bulldog and Snappy pitless adapters
- Pump-setter’s leverage on cam is better with Bulldog/Snappy cable point
- Bulldog and Snappy use 2 corrosion-resistant springs
- Bulldog uses a bigger, better cam hinge pin
- Monitor’s casing strap distributes pressure more evenly over plastic well casing than U-bolt
Part Number
Snappy
- 8PL41U (4×1)
- 8PL41U/3 (4×1) (3 pack)
- 8PL4.31U (4-1/2×1)
- 8PL51U (5×1)
- 8PL5.21U (5-3/16×1)
- 8PL5.25.61U (5-3/16×1)
- 8PL61U (6×1)
- 8PL6.21U (6-1/4×1)
- 8PL41.2U (4×1-1/4)
- 8PL41.2U/3 (4×1-1/4) (3 pack)
- 8PL4.31.2U (4-1/2×1-1/4)
- 8PL51.2U (5×1-1/4)
- 8PL6.12U (6×1-1/4)
- 8PL6.21.2U (6-1/4×1-1/4)
Bulldog
- 4A0LF (4×1)
- 4B0LF (4×1-1/4)
- 5A0LF (5×1)
- 5B0LF (5×1-1/4)
- 6A0LF (6×1)
- 6B0LF (6×1-1/4)